High-Build Floor Coatings
Thick epoxy systems that stand up to forklifts and pallet jacks.
Commercial systems →
Warehouse Epoxy
Flooring
Warehouse epoxy flooring for storage, distribution and light-manufacturing buildings: dust-free, bright, abrasion-resistant floors that handle forklifts and pallet jacks, installed in phases to keep you running.
One Of A Kind Epoxy Design And Painting installs commercial floors across Hillsborough, Manatee and Sarasota counties, with 15+ years of coating experience and free on-site estimates. Call 941-281-8866.
Warehouse Floors
Stop the Dust. Brighten the Floor.
Bare warehouse concrete dusts constantly, stains easily and swallows light. A warehouse epoxy floor seals the slab so dust stays down, spills wipe up and the whole building looks brighter. Light-colored coatings reflect overhead lighting, which helps crews see.
Warehouses are about wear, not decoration: forklift wheels, pallet drags, dropped product and wide open square footage. We diamond grind the slab, repair joints and cracks, and build a thick system with an abrasion-resistant topcoat. Large areas are phased so racks and aisles can keep operating.
What We Handle
Warehouse Flooring Services
Warehouse Guide
What Makes a Warehouse Floor Last
Film thickness beats gloss
Forklift traffic grinds through thin coatings fast. Build matters more than shine: a thick base with a hard, abrasion-resistant topcoat lasts far longer than a single thin coat, and it can be resealed in traffic lanes when they wear.
Battery charging and chemical areas
Forklift charging stations and chemical storage deserve their own spec. Battery acid is hard on standard epoxy, so those zones often get epoxy novolac. See chemical and stain resistance.
Moisture under large slabs
Big Florida slabs on grade can carry moisture. We test where there's doubt and use a moisture-mitigating primer when needed to prevent blistering. More in Florida concrete moisture problems.
Phasing a live building
Racking and inventory don't move themselves. We plan the floor in sections, time work for weekends or slow periods, and give clear return-to-service times so you can plan forklift traffic.
Where We Work
Warehouse Floors Across Tampa Bay
We serve warehouses and distribution buildings throughout:
TampaRiverviewBrandonRuskinApollo BeachPalmettoBradentonLakewood RanchSarasotaVenice
Our Work
Large-Area Floors
More Commercial Flooring
Related services:
Good To Know
Warehouse Epoxy Flooring FAQs
Will epoxy hold up to forklifts? +
Yes, when it's a thick, well-bonded system with an abrasion-resistant topcoat on a diamond-ground slab. High-traffic lanes are typically resealed periodically.
Can you coat a warehouse without shutting down? +
Usually. We phase the work by section and schedule around slow days or weekends.
Does epoxy stop concrete dusting? +
Yes. Sealing the slab with a coating stops the dusting that comes from bare concrete wearing under traffic.
What does a warehouse floor cost? +
In the Sarasota market, 2026 pricing for commercial floors over 1,000 square feet typically runs about $6.50 to $9 per square foot, depending on slab condition and system.
Free Warehouse
Floor Estimate
We'll walk the building, check the slab and recommend a system and phasing plan that keeps you operating.
941-281-8866Serving
Ruskin to Sarasota
& the greater Tampa Bay area
& the greater Tampa Bay area
Call or Text
941-281-8866Hours
Mon–Sat by appointment
Free estimates available
Free estimates available