Service Bays
Thick epoxy base, novolac where fluids are aggressive, slip-resistant topcoat.
Chemical resistance →
Auto Shop Epoxy
Flooring
Auto shop epoxy flooring for service bays, detail shops and fleet garages: chemical-resistant, slip-resistant floors that handle oil, brake fluid, hot tires and jack stands.
One Of A Kind Epoxy Design And Painting installs commercial floors across Hillsborough, Manatee and Sarasota counties, with 15+ years of coating experience and free on-site estimates. Call 941-281-8866.
Auto Shop Floors
Floors for Working Bays
A service bay floor takes oil, coolant, brake fluid, solvents, hot tires off the highway, rolling jacks and dropped tools, then gets hosed down. Bare concrete soaks all of it up. An auto shop epoxy floor keeps spills on the surface, cuts dust on freshly detailed vehicles and brightens the bay so techs can spot leaks and dropped parts.
Our typical shop system: diamond grinding (oil-soaked slabs need real prep), crack repair, a thick 100%-solids epoxy base, epoxy novolac in bays that see brake fluid or solvents, and a slip-resistant topcoat. See why hot tires peel thin coatings.
By Area
Auto Shop Floor Systems
Shop Floor Guide
Choosing an Auto Shop Floor Coating
What your floor has to survive
| Exposure | Standard epoxy | Epoxy novolac |
|---|---|---|
| Motor oil, gasoline, antifreeze | Resists well | Resists well |
| Brake fluid, solvents | Hard on it | Designed for it |
| Battery acid | Can etch | Designed for it |
| Hot tires | Resists when thick and bonded | Resists when thick and bonded |
Actual resistance depends on product, thickness, cure and how long a chemical sits. Clean spills promptly.
Slip resistance and OSHA
OSHA 1910.22 requires walking-working surfaces to be kept clean and, as far as possible, dry. We broadcast aggregate into the topcoat: heavier in wash bays and walkways, lighter where techs roll creepers and clean often.
Keeping bays open
Phase the work so half the bays keep running, schedule over weekends, and use polyaspartic topcoats where they fit (vehicles typically in about 24–48 hours versus about 72 for epoxy, depending on product and conditions).
Cost and upkeep
As a reference, 2026 Sarasota-market pricing for commercial floors over 1,000 sq ft runs about $6.50–$9 per square foot; moisture mitigation adds about $1.25–$1.75 per sq ft and cove base about $4 per linear foot. Plan to reseal high-traffic bays periodically.
Where We Work
Auto Shop Floors Across Tampa Bay
We serve repair shops, detailers and fleet garages throughout:
TampaRiverviewBrandonRuskinApollo BeachPalmettoBradentonLakewood RanchSarasotaVenice
Our Work
Shop & Garage Floors
More Commercial Flooring
Related services:
Good To Know
Auto Shop Epoxy Flooring FAQs
What is the best floor coating for a mechanic shop? +
A diamond-ground slab with a thick 100%-solids epoxy base and a slip-resistant, chemical-resistant topcoat. Bays that see brake fluid, solvents or battery acid benefit from epoxy novolac.
Will brake fluid damage an epoxy floor? +
Brake fluid is hard on standard epoxy and can soften or stain it. Epoxy novolac offers much higher resistance, and spills should be cleaned promptly either way.
How long does a shop have to close? +
Many shops phase the work bay by bay or over a weekend. Polyaspartic topcoats typically allow vehicles back in about 24 to 48 hours; traditional epoxy about 72 hours.
Is an epoxy shop floor slippery when wet? +
A smooth glossy coating can be. Broadcast aggregate in the topcoat adds traction, tuned for wash bays, walkways and work areas.
Free Auto Shop
Floor Estimate
Tell us about your bays, fluids and schedule. We'll assess the slab and recommend a system and phasing plan.
941-281-8866Serving
Ruskin to Sarasota
& the greater Tampa Bay area
& the greater Tampa Bay area
Call or Text
941-281-8866Hours
Mon–Sat by appointment
Free estimates available
Free estimates available