Flake epoxy coating on a covered lanai at a Florida home

Residential Epoxy
Flooring

Residential epoxy flooring for every part of a Florida home: garages, lanais, pool decks, laundry rooms, home gyms, bonus rooms and countertops. Seamless, easy-care surfaces built for heat and humidity.

One Of A Kind Epoxy Design And Painting coats floors and surfaces for homeowners across Hillsborough, Manatee, Sarasota and Pinellas counties. Free on-site estimates. Call 941-281-8866.

Epoxy for Your Home

More Than Garage Floors

Most people call us about the garage, and it's our most common job. But the same systems work across a Florida home: lanais and pool decks that need UV-stable, slip-resistant texture; laundry rooms and mudrooms that see water and grit; home gyms that need a tough, seamless floor; and bonus rooms or studios where a metallic floor becomes the centerpiece.

Every project starts the same way: diamond grinding, crack repair and a moisture check. Then we pick the system for the room and how you use it. Start with garage epoxy flooring if that's your main project, or compare looks in decorative epoxy flooring.

Blue-gray flake garage floor in a Florida home
Rooms We Coat

Residential Epoxy Flooring by Space

Blue flake garage floor

Garages

Flake, metallic and polyaspartic garage floors that handle hot tires.

Garage flooring →
Flake pool deck

Pool Decks

Cool-toned, slip-resistant coatings for pool decks and cages.

Pool & lanai →
Covered lanai coating

Lanais & Patios

UV-stable outdoor floors that rinse clean of sand and pollen.

Slip resistance →
Epoxy bar top

Countertops

Marble-look epoxy counters for kitchens, baths and outdoor kitchens.

Countertops →
Homeowner Guide

Choosing Epoxy for Your Home

Indoor vs. outdoor

Indoors, a thick epoxy system with a clear topcoat works well. Anywhere that sees daylight needs a UV-stable top layer so it doesn't yellow, and outdoor floors need slip-resistant texture. See outdoor epoxy and UV protection.

Which finish fits which room

SpaceTypical finish
GarageFull flake with polyaspartic topcoat
Lanai / pool deckUV-stable flake or solid, light colors, textured
Bonus room / studioMetallic epoxy
Laundry / mudroomSolid or flake epoxy
Kitchen / bathEpoxy countertops

Living in the house during the work

We use dust-controlled grinding, and most garages and lanais are done in 1 to 2 days. Epoxy has an odor while it cures, so we plan interior rooms with ventilation in mind. Timing details: how long a coating takes.

Moisture under slab-on-grade homes

Florida homes sit on slabs over damp ground. We test before we coat and use a moisture vapor barrier primer when needed.

Cost

Typical ranges run about $5–$9.50 per square foot for full-system garage coatings, about $6.50–$7.75 for lanais and pool decks, and about $8–$11 for metallic floors, depending on market, size and repairs. See epoxy flooring cost.

Where We Work

Residential Epoxy Across Tampa Bay

We work with homeowners throughout:

RuskinApollo BeachRiverviewBrandonTampaSt. PetersburgParrishBradentonSarasotaVenice
On TikTok

Residential Projects

Garages, countertops and more from our crew.

More videos on TikTok →

Related Pages

Learn more:

Warranty

Warranty on Every Floor

We stand behind our floors in writing. Our flake (chip) floor systems come with a lifetime warranty, and metallic epoxy floors carry a 10-year warranty.

Lifetime
Flake (chip) floor systems
10 Years
Metallic epoxy floors

Your written estimate includes the warranty terms, so you know exactly what is covered before work starts. Request a free estimate.

Good To Know

Residential Epoxy Flooring FAQs

Can epoxy be used inside a home? +

Yes, on concrete slabs in spaces like bonus rooms, gyms, laundry rooms and studios. Where sun reaches the floor, we use a UV-stable topcoat.

Is epoxy good for lanais and pool decks? +

Yes, with a UV-stable top layer and slip-resistant texture. Standard epoxy alone yellows in sun.

How long does residential epoxy flooring last? +

With diamond-ground prep and a quality topcoat, residential floors can last 15 to 20+ years.

Can I stay home during the install? +

Usually yes. Grinding is dust-controlled, and most garages and lanais are done in 1 to 2 days. Interior rooms need ventilation while coatings cure.

How much does residential epoxy cost? +

Typical ranges run about $5 to $11 per square foot depending on the space, finish, market and repairs. We quote after a free on-site measure.

Free Home
Epoxy Estimate

Tell us which rooms you're thinking about. We'll measure, check the slab and recommend the right system for each space.

941-281-8866

    Serving
    Hillsborough, Manatee, Sarasota
    & Pinellas counties
    Call or Text
    941-281-8866
    Hours
    Mon–Sat by appointment
    Free estimates available