Residential epoxy flooring for every part of a Florida home: garages, lanais, pool decks, laundry rooms, home gyms, bonus rooms and countertops. Seamless, easy-care surfaces built for heat and humidity.
One Of A Kind Epoxy Design And Painting coats floors and surfaces for homeowners across Hillsborough, Manatee, Sarasota and Pinellas counties. Free on-site estimates. Call 941-281-8866.
Most people call us about the garage, and it's our most common job. But the same systems work across a Florida home: lanais and pool decks that need UV-stable, slip-resistant texture; laundry rooms and mudrooms that see water and grit; home gyms that need a tough, seamless floor; and bonus rooms or studios where a metallic floor becomes the centerpiece.
Every project starts the same way: diamond grinding, crack repair and a moisture check. Then we pick the system for the room and how you use it. Start with garage epoxy flooring if that's your main project, or compare looks in decorative epoxy flooring.
Tough, chemical-resistant floors for hobby rooms and utility spaces.
Chemical resistance →
Indoors, a thick epoxy system with a clear topcoat works well. Anywhere that sees daylight needs a UV-stable top layer so it doesn't yellow, and outdoor floors need slip-resistant texture. See outdoor epoxy and UV protection.
| Space | Typical finish |
|---|---|
| Garage | Full flake with polyaspartic topcoat |
| Lanai / pool deck | UV-stable flake or solid, light colors, textured |
| Bonus room / studio | Metallic epoxy |
| Laundry / mudroom | Solid or flake epoxy |
| Kitchen / bath | Epoxy countertops |
We use dust-controlled grinding, and most garages and lanais are done in 1 to 2 days. Epoxy has an odor while it cures, so we plan interior rooms with ventilation in mind. Timing details: how long a coating takes.
Florida homes sit on slabs over damp ground. We test before we coat and use a moisture vapor barrier primer when needed.
Typical ranges run about $5–$9.50 per square foot for full-system garage coatings, about $6.50–$7.75 for lanais and pool decks, and about $8–$11 for metallic floors, depending on market, size and repairs. See epoxy flooring cost.
We work with homeowners throughout:
Garages, countertops and more from our crew.
Learn more:
We stand behind our floors in writing. Our flake (chip) floor systems come with a lifetime warranty, and metallic epoxy floors carry a 10-year warranty.
Your written estimate includes the warranty terms, so you know exactly what is covered before work starts. Request a free estimate.
Yes, on concrete slabs in spaces like bonus rooms, gyms, laundry rooms and studios. Where sun reaches the floor, we use a UV-stable topcoat.
Yes, with a UV-stable top layer and slip-resistant texture. Standard epoxy alone yellows in sun.
With diamond-ground prep and a quality topcoat, residential floors can last 15 to 20+ years.
Usually yes. Grinding is dust-controlled, and most garages and lanais are done in 1 to 2 days. Interior rooms need ventilation while coatings cure.
Typical ranges run about $5 to $11 per square foot depending on the space, finish, market and repairs. We quote after a free on-site measure.
Tell us which rooms you're thinking about. We'll measure, check the slab and recommend the right system for each space.
941-281-8866